Using The Pip (Picture-In-Picture) Function - BenQ SH Series Quick Start Manual

Using the PIP (Picture-In-Picture) function

If the display is connected to a Video image source and also to an active
Graphic image source at the same time, you can display both images on the
screen simultaneously by using PIP (Picture-In-Picture) mode.
• PC or DVI must be selected as one of the input sources in PIP mode.
• The PIP function is not available if current input is HDMI.
1. Press
INPUT
2. In the
Window
display changes to PIP mode.
3. Press
INPUT
Component Video inputs (AV1 and AV2) cannot be selected as the source of the
sub picture.
• Changing the setting of the
to toggle the screen display between these two modes:
Full screen
• To select audio from the main or sub picture, set the
menu to
Window
The table below shows the availability of the
Video and Graphic signal input combinations for the main and sub pictures:
AV1, AV2
AV3 (AV3-S)
Sub
PC
picture
DVI (via
input
HDMI)
HDMI1,
HDMI2
○ : The PIP function is available.
－ : The PIP function is unavailable and cannot be selected.
on the display to select a Graphic image source (
menu, set the
PIP
on the display to select a image source for the sub picture.
item to
PIP
PIP mode
or
Main Sub
AV1, AV2 AV3 (AV3-S)
－
－
－
－
－
item to
Picture in Picture
or
Off Picture in Picture
PIP Audio
function under different
PIP
Main picture input
PC
－ －
－ ○
－ －
－ －
－ －
OSD (On-Screen Display) menu
or ).
PC DVI
. The screen
allows you
Full screen
item in the
DVI (via HDMI1,
HDMI) HDMI2
－ －
○ －
－ －
－ －
－ －
27