Connecting The Composite Video Input; Connecting The S-Video Input - BenQ SH Series Quick Start Manual

Connecting the Composite Video input

Connect the Composite Video output of your
output equipment to the AV3 VIDEO and
AUDIO L/R terminals on the display using the
Composite Video cable as illustrated.
A Composite Video cable consists of three
connectors: Yellow (video), White (left
channel audio), and Red (right channel
audio). Ensure that the colors of the plugs and
terminals match when making connection.
To view video image from these inputs, press
and select
INPUT
Composite Video provides the least optimal
image quality. Both S-Video and
Component Video provide better quality
video signals.
AV3 supports both Composite Video and S-
Video signal inputs. If you use S-Video, you
cannot use Composite Video for that input.

Connecting the S-Video input

1. Connect the S-Video output of your
output equipment to the display's AV3 S-
VIDEO terminal using an S-Video cable
(not provided). Pay attention to the
alignment of the plugs on the S-Video
cable when inserting so as not to damage
any pins.
2. Connect the corresponding audio output
of the output equipment to the S-Video
AUDIO L/R input terminals using a
suitable audio cable (or use the Composite
Video cable. The yellow plug is not used).
To view video image from these inputs, press
and select
INPUT
You should not connect both a composite
Video and an S-Video from the same
device; just one or the other. If you have
the choice, use the S-Video instead of
composite Video as an S-video signal
provides a higher quality signal to that of
composite Video.
10 Section 1: Quick Start Guide
AV3.
AV3-S.
Composite
Video cable
Audio cable
VCR
S-Video
cable
DVD
player