Connecting The Component Video Input; Connecting The Pc Input - BenQ SH Series Quick Start Manual

Connecting the Component Video input

1. Connect the Component Video output of
your output equipment to the display's
AV1 or AV2 Y, C
using a Component Video cable (not
provided). A Component Video cable
consists of three plugs: Green (Y), Blue
(C /P ), and Red (C
B B
colours of the plugs and terminals match
when making connection.
2. Connect the corresponding audio output
of your output equipment to the AV1 or
AV2 AUDIO INPUT L/R input terminals
on the display using an audio cable (not
provided).
To view video image from these inputs, press
and select
INPUT AV1
Of the analog video signal types,
Component Video offers the best quality.
See "Supported Component Video input
signal resolutions" on page 32
supported resolutions.

Connecting the PC input

1. Connect the VGA (D-Sub) output of your
PC to the PC D-SUB terminal on the
display using a mini D-Sub (15-pin) cable
(not provided).
2. Connect the audio output of your PC to
the display's PC AUDIO terminal using an
appropriate 3.5mm-diameter Mini-jack
stereo audio cable (not provided).
To view video image from this input, press
and select
INPUT PC
When you connect the display to a PC, you
should adjust the resolution in the display
properties of the computer to closely
match the native resolution of the display
(for example, 1920 x 1080 pixels). See
"Supported PC (D-Sub/DVI) input signal
resolutions" on page 32
supported resolutions.
/P and C /P terminals
B B R R
/P ). Ensure that the
R R
or .
AV2
for
.
on other
Audio
cable
Audio
cable
Section 1: Quick Start Guide
Component
Video cable
TV game
console
Mini D-Sub
cable
PC
11