Quinny buzz Instructions For Use & Warranty page 8

>> GB
Preparing the pushchair for use and instructions for use
The illustration numbers correspond to the text
(see illustrations on pages 3 to 5).
Please note: The left and right sides are as seen from the
handlebar/back of the Buzz.
Start:
Mounting the wheels onto the frame
(1) Insert the rear wheel with axle into the Buzz frame
until you hear a "click".
(2) Insert the front fork into the tube of the Buzz frame
until you hear a "click".
Unfolding the frame
The Buzz has a unique mechanism that enables the
automatic unfolding of the frame. The environmental
temperature can affect the functioning of this mechanism,
however. In cold or frosty weather, the Buzz may therefore
unfold more slowly than usual (at room temperature).
(3) Remove the transport hook from the transport loop
on the left rear wheel and pull handlebar up.
(4) The frame will unfold itself. The handlebar will lock
into place with a "click".
Adjusting the handlebar height
(5) Press the adjustment button to adjust the handlebar
to the desired height. The handlebar will "click" into
place.
Parking brake
Always use the parking brake, even when standing still for
only a few moments!
(6) Push down on the red pedal (P) on the Buzz to set
the parking brake. Push down on the other pedal on
the left side to release the brake.
Buzz prambody:
Using the prambody
The prambody is suitable for children from birth to 6
months (up to 9 kg). Babies are able to lie flat in the
prambody. It should therefore be used for children who are
not yet able to sit up unassisted.
Placing the adapters
(7) Make sure the connection points are facing directly
upwards. If necessary, adjust them using the silver
button at the connection point.
(8) The adapters and corresponding connection point
are marked with an L (left) and R (right). Slide the
adapters into the connection points and check to
make sure they are securely fastened.
Installing the prambody
(9) Place the prambody on the adapters with the head
end at the front until you hear a "click". Check to
make sure everything is attached securely.
(10) Folding down the sun canopy: press buttons on both
sides while at the same time pushing the sun canopy
down wards. Folding up the sun canopy: pull the
handle upwards until you hear a "click".
Removing the prambody
(11) Press the control buttons on both sides while at the
same time pulling the prambody from the Buzz.
Removing the adapters
(12) Press the button (on the inside) and pull the adapters
out of the Buzz frame.
10
Maxi-Cosi:
Using with a Maxi-Cosi car seat
Maxi-Cosi infant carriers are suitable for children from birth
to 15 months and weighing up to 13 kg (as indicated on the
Maxi-Cosi car seat).
Placing the adapters
(13) Make sure the connection points are facing directly
upwards.
(14) The adapters and corresponding connection point are
marked with an L (left) and R (right). Slide the adap-
ters into the connection points and check to make
sure they are securely fastened.
Installing the Maxi-Cosi car seat
(15) Place the car seat onto the adapters with the head
end at the front until you hear a "click". Check to
make sure everything is attached securely.
Removing the Maxi-Cosi car seat
(16) Press the control buttons on both sides while at the
same time lifting the car seat from the Buzz.
Removing the adapters
(17) Press the button (on the inside) and pull the adapters
out of the Buzz frame.
GB <<
Buzz pushchair seat:
Using as a pushchair
The Buzz seat is suitable for children from 6 months to age
4 (maximum of 20 kg). If your child is not yet able to sit up
unassisted, use the reclining and semi-reclining positions
only.
Preparing the Buzz seat for use
(18) Slide the support into the cover and zip up the cover.
(19) Squeeze the sliding parts together and insert the
rod between the foot and leg rest adjuster. Check to
make sure everything is attached securely.
Placing the Buzz seat and adjusting the seat
(20) Place the Buzz seat onto the Buzz frame until you
hear a "click". Position the seat so that it is facing the
handlebar.
(21) The Buzz seat can be adjusted to two positions: a sit-
ting position and a semi-reclining position. Slide the
adjustment and release buttons on both sides down-
wards and tilt the Buzz seat into the desired position.
(22) The Buzz seat can also be placed in a forward-facing
position.
(23) The Buzz seat can be adjusted to three different
positions when forward-facing: a sitting, semi- recli-
ning and reclining position. Push the adjustment and
release buttons on both sides downwards and tilt the
Buzz seat into the desired position.
IMPORTANT: When placing and adjusting the Buzz seat,
make sure the buttons on both sides are locked. The Buzz
seat has been placed properly if the warning symbol is not
visible.
Removing the Buzz seat
(24) Push the adjustment and release buttons on both
sides downwards and lift the Buzz seat from the
frame.
11