Pan And Tilt - Martin MAC Viper AirFX User Manual

Linked zoom/focus works within 3 distance ranges (figures are approximate):
• Near (5 - 10 meters)
• Medium (10 - 20 meters)
• Far (20 meters - infinity)
To link zoom and focus, select a distance range using the Fixture control/settings DMX channel or FOCUS
TRACKING in the control panel PERSONALITY menu. Then adjust focus to obtain the required degree of
sharpness. Linking is now enabled and focus will auto-adjust.

Pan and tilt

Coarse and fine pan and tilt control are available in both basic 16-bit and extended 16-bit modes.
Quadray module
The Martin Quadray™ Module is available as an accessory for the MAC Viper AirFX. The module only takes
a few minutes to install and uninstall (see the Quadray Module Installation Guide supplied with modules and
available on the Product Support pages at www.martin.com). When installed, it splits the MAC Viper AirFX
beam into four individually controllable rays. Pre-programmed effects are also available. See "Quadray
control" on page 24 for details of DMX control of the Quadray Module.
8 MAC Viper AirFX User Guide