Troubleshooting At First Start - SOYO SY-6ZB User Manual

Pentium iii, pentium ii & celeron processor supported 82440 zx agp/pci motherboard 66&100mhz front side bus supported baby-at form factor

Hide thumbs Also See for SY-6ZB:

Table of Contents

Hardware Setup

and continue the boot sequence.

Troubleshooting at First Start

What should I do if the Motherboard refuses to start?

The 350MHz setting is used as default so whenever the BIOS

settings are erased or reset, the board will be able to boot up.

If the CPU frequency was set too high and the Motherboard refuses

to start up, you can always load the default values by pressing the

[Ins] key during boot up.

Step 19. Power Off

There are two possible ways to turn off the system:

Use the Shutdown command in the Start Menu of Windows

95/98 to turn off your computer.

Press the mechanical power-button and hold down for over 4

seconds, to shutdown the computer. If you press the power-

button for less than 4 seconds, then your system will enter into

Suspend Mode.

You are now ready to configure your system with the BIOS setup

program. Go to Chapter 3: BIOS SETUP

SY-6ZB

Table of Contents