Entering An Auto-Configuration Code; Selecting A Provider And Loading Provider Data To The Base Station - Gigaset A580 IP User Manual

Saving VoIP access data
9

Entering an auto-configuration code

Code:
Ç
10
Selecting a provider and loading provider data to the
base station
Select country is displayed briefly in the dis-
play. A list of countries is loaded and the first
country in the list is shown in the display.
Germany
Ç V
>
Press the bottom of the control key
repeatedly, until your country is displayed.
Press the display key §OK§.
>
If your provider does not appear in the list, you have the following options:
>
Press the left display key
make a call via VoIP once you have completed the provider details using the Web configura-
tor. Your VoIP provider will supply you with this data.
Exit the connection assistant by holding the end call key a and entering the provider and
>
VoIP account details via the Web configurator.
You will find more detailed information about this in the user guide on the enclosed CD.
>
>
OK
All data necessary for VoIP telephony is loaded directly
from the Internet to your phone.
Following successful download, Saved is shown in the
display.
Proceed as described under
OK
Ç
twice and continue as described in
Enter your auto-configuration code using the key-
pad (max. 32 characters).
Press the right-hand display key
Select provider is displayed briefly in the dis-
play. A list of providers is loaded and the first
provider is shown in the display.
Ç
>
Press the bottom of the control key
repeatedly, until your provider is displayed.
Press the display key §OK§.
>
§OK§
.
12
.
Provider 1
V
OK
11
. However, you can only
11