Store Control Code - Siemens mobile phone User Manual

12.2.02 06-S46 Body.fm
30

Store control code

Phone numbers and control codes
(DTMF tones) may be stored
together in the SIM phone book as
standard entries. Control codes may
be used to access answering
machines or voicemail or to respond
to any other system that requires a
touch tone response.
To store a phone number with
pauses for control codes (DTMF
tones):
J
Enter phone number.
0
Press until a plus ("+") or
"P" symbol appears on
the screen to insert a
three-second pause.
J
Enter DTMF signals
(digits).
0
If necessary, insert
additional three-second
pauses.
#
If necessary, insert a
wait, which is similar to a
pause except that the
digits to the right of the w
are not sent until you
press send.
<
Select soft key to copy
the entry to the address
book. If required, assign
a name to the entry.
§OK§
Select soft key.
DTMF signals (digits) may also be
stored in separate phone book
entries and sent during a call (p. 22).
i 37 Am Engl, A31008-H5450-A5-1-4A19
SIM Phone Book
Service numbers
Certain phone numbers may have been
pre-programmed by your service provider in
the SIM phone book's service numbers
folder. These numbers typically provide
access to information services from your
service provider.
Protected phone numbers
Please note that the use of your SIM phone
book may be restricted (usual for some
business applications). For example,
incomplete phone numbers may be
indicated by a "?". These can be completed
before dialing.