Setup; Profiles - Siemens mobile phone User Manual

12.2.02 06-S46 Body.fm

Setup

Preparation of the phone for Internet
access depends on the service
provider currently used:
• If the settings have already been
made by your service provider you
may begin immediately.
• If access profiles have been
assigned by your service provider
select a profile and activate it
(p. 47).
• The access profile must be set
and activated manually (p. 47).
If necessary, check with your service
provider for details.

Profiles

You can set and change up to five
access profiles (some of these may
be disabled by the service provider).
The entries and functions may vary
depending on your service provider.
You can change a profile each time
before you access the Internet
(p. 48).
Profile settings
§Menu§ Surf & fun
Internet
„
Select the profile set.
Edit
The setup menu is
displayed.
„
Select the menu items
one by one and make
your entries.
You may get further information
i 37 Am Engl, A31008 -H5450-A5-1-4A19
WAP
on the entries from your service
provider.
Profiles
©
Profile Name the profile or rename a
name: default name.
WAP IP address:
parameters Enter the IP address.
Port:
Enter port number.
Homepage:
Enter humped (p. 47), if not
set by the service provider.
Linger time:
Enter time in seconds when
a connection should be
terminated if no input or no
data transfer takes place.
CSD / GPRS See page 81.
settings
These are two methods the
phone uses to send/receive
information.
§Edit§
Open menu.
Save
The settings are stored
and the profile list is
displayed.
Special characters (as in the SMS
text editor, p. 37)
*
Press three times for
#
Press three times for
0
Press for . (period)
0
Press repeatedly for :
*
Press repeatedly for ~
47
/
@