Saving Dtmf Control Code - Siemens A35 Manual

Saving DTMF Control
Code
You can save your fixed network num-
bers in your PhoneBook together with
control codes (tone sequences), e.g.
mailbox PIN or remote replay PIN for an
answering machine.
I
Enter the number.

Hold down until a "+" ap-
pears (pause in connection
setup).
I
Enter the control code.

If necessary insert more
pauses to ensure that the
numbers are processed se-
curely on the receiver side.
Sending a Control Code
A control code can be entered manually
after a connection has been set up:
I
Enter the numbers for the
tone sequence.
Service numbers
Your service provider can equip your
SIM card with service numbers. If this
case, you will see <Service Numbers> as an
entry in your PhoneBook.
„
Menu Phonebook
-
Scroll to the required service
number.
=
Press. The number is dialled.
PhoneBook
„
Service numbers
Information Numbers
Your network provider can equip your
SIM card with info numbers. These
numbers can be stored together in di-
rectories (e.g. hotels, weather). The
numbers or directories appear auto-
matically as entries in the PhoneBook.

If appears beside an entry, it can
only be dialled in the local network.
Dialling Information Numbers
„
Menu Phonebook
-
Scroll to the required
directory.
Select Press to open the directory.
-
Scroll to the required entry.
=
Press. The number is dialled.
Active Line
„
Menu Phonebook
The line is active in the following exam-
ple. You can switch to line .
D
<Active Line>

Press
to switch to Line  in this
example.
,
„
Info Numbers
,
„
<Active Line>
K

[Line ]
A
,
11