Sub-Zero 700 SERIES Use And Care Manual page 9

How to Adjust
Temperatures
If you need to adjust the temper-
ature in any area of the unit,
press the zone button, until the
name of the zone you want to
adjust is flashing. If you do not
adjust the temperature within
five seconds, the control panel
will automatically go out of the
set mode and continue to moni-
tor the unit.
To decrease the temperature
When the selected zone is
displayed, you can decrease the
temperature in that zone by one
degree each time you press the
colder button. For example, if
you have selected the "cabinet"
zone and a temperature of 38°F
is displayed, you can decrease
the temperature by pressing the
colder button two times.
To increase the temperature
Similar to the decrease tem-
perature instructions, you can
increase the temperature by one
degree each time you press the
warmer button for the zone you
have selected.
Recommended
Temperature Settings
Refrigerator units are factory
pre-set to maintain zones 38°
Fahrenheit. The temperature
range is 34°F to 45°F.
Freezer units are factory
pre-set to maintain zones at 0°
Fahrenheit. The temperature
range is -5°F to +5°F.
To use the integrated system
efficiently, set temperatures to
decrease from the top cabinet to
the lower drawer. A suggestion
that offers great flexibility is ...
• cabinet 38°F
• upper drawer 35°F
• lower drawer 32°F
How to Operate
the Alarm
When your alarm is on, the
alarm bell will be illuminated on
the control panel. To turn the
alarm off, press the alarm button
one more time to make the bell
disappear from the display.
9