Advertisement
MANUALLY
LIGHTING
THE BURNERS
WITH
THE MATCH
HOLDER
1.
Open the lid.
2.
Ensure all burners
are in the "OFF" position.
3.
Slowly turn on the gas at the LP cylinder
valve if it is not already
on.
4.
Place a match in the match light stick, This is
located
inside the left cabinet
door.
5.
Use the stick to slide the lit match through
the cooking
grates and the front of the heat
diffuser
to the burner
you wish to light.
6.
Press and turn the burner
control
knob to
"Hi". Continue
to push in and hold up to 5
seconds or until the burner
lights.
If the burner
does not light within
5 seconds,
turn the burner
control
knob to
"OFF". Wait 5 minutes
for gas to clear, and try
again.
8.
When lit, turn the control
knob to the desired
heat setting.
MANUALLY
LIGHTING
THE
SIDE
BURNER
OR
THE
BACK
BURNER
1.
Open the grill lid or side burner
coven
2.
Ensure the control
knob is in the "OFF"
position
as well as any main burner
not in
use,
3.
Slowly
turn
on the gas
if it is not
already
on.
4.
Strike
the match,
and place near the top
of the burner.
5.
Turn the control
knob to "Hi"
6,
If the burner
does not light within
5
seconds,
turn the burner
control
knob to
"OFF". Wait 5 minutes
for the gas to clear,
and try again.
7.
When lit, turn the control
knob to the
desired
setting.
8,
Continue
to press in and hold the back
burner
control
knob for 5 to 7 seconds
once lit to activate
the safety
flame
sensor.
Failure to do so will cause gas
to be shut off to the back burner and the
burner
will go out.
1.
Do not use charcoal
briquettes,
lava rock,
or any type of ceramic
product
in this grill.
2.
Do not put a barbecue
cover or other
flammable
material
in the storage area of
this grill.
Never
lean over the grill cooking
area while
lighting
your gas grill. Keep your face and body
a safe distance
(at least 18 inches)
from the
lighting
hole and burners
when lighting
your
grill with a match.
23
Advertisement
