Machine Information; Checking The Serial Number; Reset Functions; How To Reset The Machine - Brother DCP-9270CDN Basic User's Manual

Machine Information

Checking the Serial Number

You can see the machine's Serial Number on
the LCD.
a
Press MENU.
b
Press a or b to display
Machine Info..
Press Machine Info..
c
The machine will display the machine's
Serial Number on the LCD.
d
Press Stop/Exit.

Reset functions

The following reset functions are available:
1 Network
You can reset the internal print server
back to its default factory settings such as
the password and IP address information.
2 All Settings
You can reset all the machine settings
back to the settings that were default
factory settings.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
Note
Unplug the interface cable before you
choose Network or All Settings.

How to reset the machine

B
a
Press MENU.
B
b
Press a or b to display
Initial Setup.
Press Initial Setup.
c
Press Reset.
d
Press Network or All settings to
choose the reset function you want to
use.
e
Do one of the following;
 To reset the settings, press Yes and
go to step f.
 To exit without making changes,
press No and go to step g.
B
f
You will be asked to reboot the machine.
Do one of the following;
To reboot the machine, press Yes for

2 seconds. The machine will begin
the reboot.
 To exit without rebooting the
machine, press No. Go to step g.
g
Press Stop/Exit.
Note
You can also reset the Network settings
by pressing MENU, Network,
Network Reset.
Troubleshooting
B
B
119