ZMODO Funlux Manual Manual page 18

5. Slide the DVR panel back on and locate the 7 black Phillips screws (found in
kit). Apply the screws in the three holes on the back panel, and the two holes on
the sides.
6. When you power on your system, you will see a popup asking you to format
your HDD. Press [OK] and wait 5-10 minutes. NOTE: If you do not see this
popup, please manually format your HDD by going to the Disk Drive Info page
(for more instructions, please refer to 4.1 Main Menu Detailed).
First-time Setup 3.4