Gastroback Design Espresso Advanced Barista Edition Operating Instructions Manual page 21

1. Prepare to make a single shot of espresso by following steps 2 to 6 in ›Dual Wall Filters
for Beginners‹.
2. Place your cup underneath the group head.
3. To begin programming, press the PROGRAM-button once. The machine will beep once and
the program button will begin to flash. This indicates the machine is in programming mode.
4. Press the -button once. The machine will commence normal pour function, and
-button surround will begin to flash.
5. When the desired amount of espresso has poured into the cup, press the
stop the pour. The machine will beep twice, indicating it has saved your preferred pour
quantity and exited programming mode.
6. The -button will now pour the saved shot size when pressed, unless reprogrammed,
reset to the default settings, or overridden by the manual function.
progrAmming DouBle espresso
Programming over-rides the preset shot sizes (1oz or 2oz), re-programming the button to
pour your preferred shot size.
1. Prepare to make a two cup of espresso by following steps 2 to 6 in ›Dual Wall Filters for
Beginners‹.
2. Place your cup underneath the group head.
3. To begin programming, press the PROGRAM-button once. The machine will beep once and
the program button will begin to flash. This indicates the machine is in programming mode.
4. Press the
-button surround will begin to flash.
5. When the desired amount of espresso has poured into the cup, press the
stop the pour. The machine will beep twice, indicating it has saved your preferred pour
quantity and exited programming mode.
-button once. The machine will commence normal pour function, and the
57
-button to
-button to