Limit maximum
Electric and Power consumption
This function is used when the circuit breaker is shared with other electrical appliances. It limits
the maximum current and power consumption to 100%, 75% or 50% and can be implemented by
POWER-SELECTION. The lower percentage, the higher Saving and also longer compressor
lifetime.
PRESET
30
•
When the level is selected, PWR-SEL level flashes on remote LCD display for 3 seconds.
In case of 75% and 50% level, number "75" or "50" also flashes for 2 seconds.
•
TEMP.
Due to the reason that POWER SELECTION FUNCTION limits the maximum current,
inadequate cooling or heating capacity may occur.
POWER-SELECTION OPERATION
POWER SEL
POWER SEL
[100%]
Notes
POWER SEL
POWER SEL
[75%]
[50%]
[100%]