Outdoor Unit; Accessories (Attaching And Detaching Remote Control Holder) - Toshiba RAS-10G2KVP Series Owner's Manual

Outdoor unit

Air inlet
(Back and
lateral sides)
Air outlet
Drain outlet
(Bottom)
How to attach the remote control holder
Attach the remote control holder to a wall or a column with the
supplied attachment screws for the remote control holder.
Screws to attach
remote control
holder
6
Temporary switch
Remote control
receiving module
Remote control holder
Operation mode lamp
"Cool" (Blue)
"Heat" (Orange)
Accessories
Remote control
Piping and cable
Drain pipe
(Drain hose)
Dry batteries (2 pieces)
AAA alkaline dry batteries
How to attach / detach from the remote
control holder
Insert the "stick out" of the remote control
holder into the hole of the lower remote
control and set it while pressing toward the
direction of arrow.
Detach it by reversing the procedure.
"Operation" lamp
"Timer" lamp
"Plasma ionizer purifier" lamp
Remote control holder
Attachment screws for
remote control holder
(2 pieces)
Hole
Stick out