Victory Vegas 2008 Owner's Manual page 95

Table of Contents

Advertisement

MAINTENANCE
Engine Oil
Check Engine Oil Level
1. With the transmission in neutral, start and run the engine for
several minutes.
2. Shut the engine off and wait for 3-5 minutes.
3. With the engine at normal operating temperature, straddle the
motorcycle on level ground and bring it to a vertical position.
Remove the oil fill cap and wipe the dipstick clean. Reinstall the
dipstick and turn the cap clockwise until it seats.
4. Remove the dipstick again and note the oil level.
5. If necessary, add or remove oil to bring the level into the area on
the dipstick, above the ADD mark and below the FULL mark
(see page 53). Repeat steps 1-2 each time you adjust the oil level.
WARNING
Do not operate the motorcycle with the oil level above the FULL mark or below the ADD mark. Operating
the engine with too much or too little oil can cause serious engine damage or engine seizure, resulting in
loss of control of the motorcycle.
90
1
2
3
1. Oil Fill Cap/Dipstick
2. ADD Mark
3. FULL Mark

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents