Options - Kenmore 15801 Use And Care Manual

Options
O O O m O
RINSE WASHING WATF..R HEATING RINS_KI
1Ira O O O _ ID ID lID
HOURS
POTS NORMAL WATER CHINA
PANS WASH MISER WASH
CYCLES
D
GLEAN
6
a
I
LOCK ON
J
Option
WATER HEAT
• Automatic with Pots Pans
• Option for Normal Wash and
Water Miser cycles
• Not available for China Wash
or Quick Rinse cycles
NO HEAT DRY
• Option for Pots Pans, Normal
Wash, Water Miser and China
Wash cycles
DELAY HOURS
• Option for any cycle
When should I use It?
To ensure water temperature in
main wash reaches 140°F
(60°C).
Use when you do not need a
rapid dry cycle. Allow longer
drying times (overnight). Use
rinse agent to improve drying.
Use when you want to start a
cycle later.
Set delay to run dishwasher
during times when off-peak
utility rates are in effect, Local
utilities recommend this to avoid
heavy usage of energy at
certain times of day.
What does it do?
• When you select Water Heat, main wash
delays until water heats to 140°F (60°C).
• As water heats, washing action continues.
The Water Heating status indicator glows
until water reaches proper temperature.
I • Turns off heating element in 30-minute dry
period.
• Delay beginning of your selected cycle and
options for up to 6 hours.
• To set:
1. Close the door firmly until you hear it latch.
2. Select the desired cycle and options.
3. Press Delay Hours once for a 2 hour delay,
twice for 4 hours, and 3 times for 6 hours.
The appropriate status indicator will glow.
• Press Delay Hours a fourth time to cancel the
option.
• If you wish to put more dishes in the
dishwasher while it is in delay mode, be sure
to latch the door after you add them.
• The amount of delay can be changed or
canceled at any time before the cycle begins.
14