Philips RQ1200 series User Manual page 31

Problem
Specific types
only: The shaver
is not entirely
clean after
I clean it in
the Jet Clean
System.
Possible cause
The shaving unit is soiled or
damaged to such an extent
that the motor cannot run.
In this case, the shaving unit
symbol, the tap symbol and
the exclamation mark flash.
The temperature of the
shaver is too high. In this
case, the shaver does not
work and the exclamation
mark on the display flashes.
The cleaning fluid in the
cleaning chamber is soiled.
The cleaning fluid level is
too low. If the fluid volume
in the cleaning chamber
drops below the minimum
level during the cleaning
program, the program
aborts.The cleaning light and
the 'cleaning chamber empty'
symbol flash at intervals and
the holder returns to its
starting position.
English
Solution
Clean the shaving
unit or replace it (see
chapters 'Cleaning
and maintenance'
and 'Replacement').
Switch off the shaver
and let it cool down.
As soon as the
temperature of the
shaver has dropped
sufficiently, you can
switch on the shaver
again.
Empty and rinse the
cleaning chamber
and refill it with new
cleaning fluid.
Refill the cleaning
chamber with
cleaning fluid to
a level between
the two lines (see
chapter 'Cleaning and
maintenance').
31