Philips RQ1200 series User Manual page 30

English
30
Problem
The shaver does
not shave as
well as it used
to.
The shaver does
not work when
I press the
on/off button.
Possible cause
The shaving heads are
damaged or worn.
Long hairs obstruct the
shaving heads.
Specific types only: The
Jet Clean System has not
cleaned the shaver properly,
because the cleaning fluid
in the cleaning chamber is
soiled or the cleaning fluid
level is too low.
The rechargeable battery is
empty.
Specific types only: The travel
lock is activated.
Solution
Replace the shaving
unit (see chapter
'Replacement').
Clean the shaving
heads by following
the steps of the
extra-thorough
cleaning method (see
chapter 'Cleaning and
maintenance').
Clean the shaver
thoroughly before
you continue shaving.
If necessary, clean
and refill the cleaning
chamber (see
chapter 'Cleaning and
maintenance').
Recharge the
battery (see chapter
'Charging').
Press the on/off
button for 3 seconds
to deactivate the
travel lock.