Connections; Bus Connection; Programming Individual Address; Reset Device - Philips LightMaster Installation And Operation Manual

Connections

RC GPS
RC DCF
Data
KNX
L N
N
L

Bus Connection

Push button
Programming LED
KNX bus terminal
8

Programming individual address

1. Press push button on front of device.
2. The programming LED lights up.
3. The device is now in program mode
Start-up, diagnostics, configuration and
application download are handled by ETS
(KNX tool software).

Reset device

1. Press the 4 keys simultaneously.
ENGLISH is displayed.
2. Select KEEP PROGRAM or
DELETE PROGRAM.

Operation of Display and keys

Program display
Programmed
switching times
Weekday and
Date display
Channel status
ON = On Display of the active keys
OFF = Off with the relevant function
MENU
MENU
– Activate screen
– Open menu
  OK
– Cancel menu
– Store selection
– ESC (1 step back) Display
– Confirm selection
options
Memory Card
Interface
Time display
Weekdays from
1 to 7
Program timeclock
Astronomical
1. Read text lines.
program display
2. Make decision.
3. Yes – Confirmation,
OK
Press OK.
4. No – Amend/Change,
Press
GB
9