Memory Card - Philips LightMaster Installation And Operation Manual

Memory card

Use memory card (see fig.)
• Insert memory card in the time switch.
• Read/read out saved switching times and
device settings in the time switch or start
Obelisk program.
• Remove memory card OBELISK after
copying and store in the cover. Avoid
mechanical stress or dirtying with other
storage/transport methods.
36
Copy OBELISK to TIME SWITCH
This copies the switching program
(all standard and special programs) and
optionally all timeclock settings (e.g. position,
offset, external input, time format etc.) from
the memory card to the timeclock.
Copy TIME SWITCH to OBELISK
This copies all switching programs and settings
from the timeclock to the memory card
OBELISK
OK
COPY OBELISK TRANSCRIBE
- > TIME
OK
SWITCH
COPY TIME
SWITCH - >
OBELISK
START
OBELISK
PROGRAM
OBELISK
INFO
END
GB
37