6. Printing Stored Documents (Cont.)
Printing the stored document after changing the settings
The following settings are available before the stored document is printed.
1. Paper source (Press the drawer icon to be set as a paper source. However, the paper in the drawer
selected for the paper source is used only when its size and type correspond to those of the
documents in the box.)
2. Number of printings (Key them in.)
3. Simplex printing / duplex printing
4. Finishing mode (Selecting the mode is limited depending on the installed optional equipment.)
5. Paper exit (Available when the 2-Bin Finisher or 2-Bin Saddle-Stitch Finisher (both are optional) is
installed)
6. Image shift position
7. Added date and time position
8. Page number position
6
1
Follow steps 1 to 4 of
2
Press the [SETTINGS] button.
3
Set the printing modes as required.
• See the eight items mentioned above for the setting mode. To set items 3 to 8, press the button and set the
required setting on the menu.
186
6. e-FILING
1
2
P.183 "Printing the whole document".
4
3
5
6
7
8