Activating/Deactivating Suppression Of The First Ringtone; Advisory Tones - Swisscom Aton CL100 User Manual

a
Press and hold (idle status).
Setting ringer melody
Set different ringer melodies for external calls,
internal calls and the alarm clock.
¢
Audio Settings
§Menu§
External Calls / Internal Calls
Select and press
q
Select melody (
.
§OK§
a
Press and hold (idle status).
Activating/deactivating the ringer
You can turn off the ringer on your handset
before you take a call or while the phone is in
the idle state. You can take a call so long as it is
displayed on the screen.
Deactivating the ringer
P
Press the star key and hold, until
Ú
the icon appears in the display.
Re-activating the ringer
P
Press and hold the star key in idle
status.
Activating/deactivating
suppression of the first ringtone
The phone identifies an incoming SMS from the
first network signal.
4 I O 2 5
§Menu§
~ 1
First ring muted.
§OK§
Or:
~ Q
First ring audible.
§OK§
Please remember:
If first ringtone muting is deactivated, then
every incoming SMS will be signalled by a ring-
tone. If you take this type of "call" at the first
ringtone, you will lose the SMS.
¢
Ringer Melody
/ Alarm Clock
.
§OK§
‰
= on) and press

Advisory tones

Your handset uses 'advisory tones' to tell you
about different activities and statuses. The fol-
lowing tones can be activated and deactivated
independently of each other:
u
Advisory tones:
– Key click: Each key press is acknowl-
edged.
– Confirmation tone (rising tone
sequence): at the end of an entry/set-
ting, when the handset is placed in the
base station and on arrival of an SMS or
a new entry in the calls list.
– Error tone (descending tone sequence):
when you make an incorrect entry.
– Menu end tone: when scrolling at the
end of a menu.
u
Battery warning tone: the battery requires
charging.
You cannot deactivate the confirmation tone
for placing the handset in the base station.
Activating/deactivating advisory tones
¢
Audio Settings
§Menu§
Select and press
Setting the battery warning tone
¢
Audio Settings
§Menu§
On / Off / During Call
Select and press
battery warning tone is activated
or deactivated or sounds during a
call.
Handset settings
¢
Advisory Tones
‰
( = on).
§OK§
¢
Battery Low
‰
( = on). The
§OK§
23