Usb Floppy Disk Drive; External Monitor - Toshiba tecra s3 User Manual

3. Close the lid and slid the lock to the lock position.
For details on inserting the Ultra Slim Bay HDD adaptor in the computer's
Ultra Slim Bay slot, refer to Chapter 4,

USB floppy disk drive

The USB floppy disk drive module can be connected to the USB port. For
details on connecting the USB floppy disk drive module, refer to Chapter 4,
Operating

External monitor

An external analog monitor can be connected to the external monitor port
on the computer. The computer supports XGA and Super XGA video
modes. To connect a monitor, follow the steps below.
1. Turn the computer's power off.
2. Connect the monitor cable to the external monitor port and tighten the
screws on the left and right hand side.
User's Manual
Basics.
Monitor cable
Figure 8-17 Connecting the monitor cable to the external monitor port
Figure 8-16 Closing the lid
Operating
Optional Devices
Lid
Basics.
External monitor
port
8-15