Inserting A Module; Using Optical Media Drives - Toshiba tecra s3 User Manual

Inserting a module

Insert the Ultra Slim Bay HDD adaptor as described below.
1. Insert the Ultra Slim Bay HDD adaptor in the computer as shown below
and press until the ejector clicks.
2. If you want to lock the Ultra Slim Bay HDD adaptor, set the Ultra Slim
Bay lock screw in the hole for the lock position (➁). The lock screw is
inserted in the unlock position (➀) at the time of purchasing.

Using optical media drives

The text and illustrations in this section refer primarily to the optical media
drive. However, operation is the same for other optical drive in the Ultra
Slim Bay. The full-size drive provides high-performance execution of CD/
DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used
for CD/DVD-ROM operation. When the computer is accessing a CD/DVD-
ROM, an indicator on the drive glows and the Ultra Slim Bay indicator
glows.
Use the WinDVD application to view DVD-Video discs.
If you have a DVD-ROM&CD-R/RW drive, refer also to the
DVD-ROM&CD-R/RW drive
If you have a DVD Super Multi drive, refer also to the
DVD Super Multi drive
When the power of the optical media drive is off, pressing the Fn + Tab
keys will turn the power of the optical media drive on. Furthermore, it is
possible to set it to turn the power of the optical media drive on and eject
the tray at the same time.
User's Manual
Lock screw
Ultra Slim Bay HDD adaptor
Figure 4-5 Inserting the Ultra Slim Bay HDD adaptor
section for precautions on writing to CDs/DVDs.
section for precautions on writing to CDs.
Operating Basics
Writing CDs on
Writing CD/DVDs on
4-13