Disassembly And Assembly - Pride go-go ultra Owner's Manual

V I I I . D I S A S S E M B LY A N D A S S E M B LY
DISASSEMBLY
No tools are required to disassemble or assemble your scooter. Always disassemble or assemble your scooter on
a level, dry surface with sufficient room for you to work. Keep in mind that the disassembled sections of a scooter
take up more floor space than the assembled scooter.
You can disassemble the scooter into four pieces: the seat, the front section, the rear section, and the battery
pack. See figure 11.
REAR
SECTION
BATTERY
PACK
Figure 11. Disassembled Scooter
WARNING! Lifting weight beyond your physical capability may result in personal injury.
Ask for assistance when necessary before disassembling your scooter.
Before disassembling the scooter, remove the key and place the manual freewheel lever in the drive (rearward) position.
1. From the unlocked position (see figure 12), lock the front wheel by pushing the tiller lock knob in and turning
it clockwise 90°. See figure 12A.
UNLOCKED
POSITION
Figure 12. Tiller Lock Knob (Unlocked)
Go-Go Ultra
FRONT SECTION
LOCKED
POSITION
Figure 12A. Tiller Lock Knob (Locked)
www.pridemobility.com
SEAT
29