Disassembly Procedure Of Outdoor Unit - Sanyo SAP-KRV9AEH Service Manual

9-2. Disassembly Procedure of Outdoor Unit

To avoid electrical shock hazard, be sure to disconnect all power and wait
Warning
10 minutes or more before attempting to disassemble the unit.
9-2-1. Removing the stop valve cover
(1) Loosen the screw of the stop valve cover. (Fig.51 and Fig.52)
Pull down the stop valve cover and remove it.
The stop valve cover has 5 hooks.
NOTE
9-2-2. Removing air filters
(1) Loosen the 3 screws (front, right and left) and lift the top panel. (Fig.53)
(2) Loosen a screw and remove the discharge grill. (Fig.54)
Handle
Fig. 51
Top panel
Fig. 53
55
Stop
valve
cover
Fig. 52
Fig. 54