Weslo WCTL39320 User Manual page 17

HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS
To use iFIT.com CDs or videocassettes, the treadmill
must be connected to your portable CD player, portable
stereo, home stereo, computer with CD player, or
VCR. See HOW TO CONNECT THE TREADMILL TO
YOUR CD PLAYER, VCR, OR COMPUTER on page
14. Note: IFIT.com CD and video programs will con-
trol only the speed of your treadmill.
To purchase iFIT.com CDs or videocassettes, call
toll-free 1-888-936-4266.
Follow the steps below to use an iFIT.com CD or video
program.
Insert the key into the console.
1
See HOW TO TURN ON THE POWER on page 11.
Select the iFIT.com mode.
2
When the key is in-
serted, the manual
mode will be selected.
To use iFIT.com CDs
or videocassettes,
press the Mode button
repeatedly until the iFIT.com indicator lights.
Insert the iFIT.com CD or videocassette.
3
If you are using an iFIT.com CD, insert the CD
into your CD player. If you are using an iFIT.com
videocassette, insert the videocassette into your
VCR.
Press the PLAY button on your CD player or
4
VCR.
A moment after the button is pressed, your per-
sonal trainer will begin guiding you through your
workout. Simply follow your personal trainer's
instructions. Note: If the Time display is flashing,
press the Start button or the Speed
the console. The treadmill will not respond to a
CD or video program when the Time display is
flashing.
During the CD or video program, an electronic
"chirping" sound will alert you when the speed of
the treadmill is about to change. CAUTION:
Always listen for the "chirp" and be prepared
for speed changes. In some instances, the
speed may change before the personal trainer
describes the change.
If the speed setting is too high or too low, you can
manually override the setting at any time by
pressing the Speed buttons on the console.
However, when the next "chirp" is heard, the
speed will change to the next setting of the CD
or video program.
To stop the walking belt at any time, press the
Stop button on the console. The Time display will
begin to flash. To restart the program, press the
Start button or the Speed
ment, the walking belt will begin to move. When
the next "chirp" is heard, the speed will
change to the next setting of the CD or video
program.
When the CD or video program is completed, the
walking belt will stop and the Time display will
begin to flash. Note: To use another CD or video
program, press the Stop button or remove the key
and go to step 1.
Note: If the speed of the treadmill does not
change when a "chirp" is heard:
• Make sure that the iFIT.com indicator is lit and
• Adjust the volume of your CD player or VCR.
• Make sure that the audio cable is properly
Follow your progress with the LED track and
5
the displays.
See step 5 on page 11.
Measure your heart rate, if desired.
6
See step 6 on page 12.
L L
When the program is completed, remove the
7
button on
key.
See step 6 on page 13.
CAUTION: Always remove iFIT.com CDs and
videocassettes from your CD player or VCR
when you are finished using them.
17
that the Time display is not flashing. If the
Time display is flashing, press the Start but-
L L
ton or the Speed button on the console.
If the volume is too high or too low, the con-
sole may not detect the program signals.
connected, that it is fully plugged in, and that
it is not wrapped around a power cord.
L L
button. After a mo-