Disabled Options In This Section - Xerox DocuMate 4830 User Manual

Disabled Options in this Section

Some options in the interface may be grayed out and cannot be selected. Grayed out options are either not
appropriate for the current scanner, the software needed to enable the feature is not installed, or the feature is
dependent on another setting in the scanner's interface. Hover the mouse cursor over a grayed out feature to see
information about why the feature is unavailable.
When you are using a scanner that has multiple sources, such as an ADF with Flatbed combination scanner, some
options may be disabled based on the current source displayed in the source list. For example when the flatbed
source is selected, the manual feed option will be disabled.
If an option is unavailable, check to see which source is displayed at the top of the source list when in the Advanced
interface view.
When Flatbed is displayed here, only the
options that can be used for the flatbed will
be available in the scanner interface.
Note that even when Sources identical is selected, any options that are only available for a specific source will be
discarded if the scanner scans from the source that does not have those options.
162 ®
Xerox DocuMate
User's Guide
Click on one of the color modes under the
source you want to configure. That source
will now be displayed at the top of the list,
and the options for that source will be
available in the scanner interface.
®
4830