Table of Contents
Advertisement
Command
Options Function & Description
&N4
&N5
&N12
&N14
&N15
&N16
&N17
&N18
&N19
&N24
&N25
&N60
&N62
&N63
&N64
&N65
&N66
&N67
&N68
&N69
&N70
&N71
&N72
&N73
&Pn
&P0 *
&P1
&Rn
&R0
&R1 *
&Sn
&S0 *
&S1
&Tn
&T0
&T1
&T3
&T4
&T5
&T6
&T7
&T8
&Vn
&V0
&Vn
&V3
&Wn
n=0-1
V.32 9600/7200T/4800
V.32 4800
V.23 1200
V.22bis 2400/1200
V.22 1200
V.21 300
V.32bis 14400/12000/9600/7200/4800
V.32bis 12000/9600/7200/4800
V.32bis 7200/4800
BELL 212A 1200
BELL 103 300
V.34bis 33600
V.34 28800
V.34 26400
V.34 24000
V.34 21600
V.34 19200
V.34 16800
V.34 14400
V.34 12000
V.34 9600
V.34 7200
V.34 4800
V.34 2400
Pulse dial make/break ratio
make / break, 39% / 61%
make / break, 33% / 67%
RTS (Request To Send) function selection
CTS tracks RTS, response delay is set in S26
Ignore RTS, assumes RTS always ON
Data Set Ready (DSR) function selection.
DSR overridden, DSR always ON.
DSR set ready
Modem testing.
Terminate test in progress.
Initiate Analog Loop-back (ALB) test.
Initiate Local Digital Loop-back (LDL) test
Grant Remote Digital Loop-back request from remote modem
Deny Remote Digital Loop-back request from remote modem
Initiate Remote Digital Loop-back (RDL) test
Initiate Remote Digital Loop-back with self test (RDL+ST)
Initiate Analog Loop-back with self test. (ALB+ST)
View profile settings.
View current active settings.
View the (n-1) user profile settings (n=1-2)
View the factory settings
Write current settings to user profile n in non-volatile RAM.
AT Command Set Summaries 19
Advertisement
Table of Contents
