Advertisement
REPLACE TANK-IN-TANK"
SYSTEM
\
Return filter/float assembly to Dirty Water
Tank. To ensure proper fit, make sure the
arrow on the filter/float
assembly lines up
with the Align Filter Front arrow on Tank-
in-Tank".
Replace Tank-in-Tank
TM
System by inserting
bottom first and tilting
forward until tank
latch fastens.
ALL SURFACE FLOOR CLEANER
CARE
WARNING
To reduce
the risk of Injury
from
moving
parts
unplug
before
servicing.
NOTE: For best results, clean filter after
each use and replace annually.
TO CLEAN FILTER
Turn unit off and
_
unplug from electrical
outlet.
Remove Tank-in-
Tank" System by
pushing down on tank
latch and tilting out
from cleaner.
Grasp tab on
filter/float
assembly
and pull up to remove
from tank.
Remove filter from
filter/float assembly by
grasping angled top of
filter and turning
counterclockwise.
Lift
filter up and out of
filter assembly.
b.
_,l
Remove any loose debris from filter by
tapping the filter against a garbage can.
NOTE:
For additional cleaning, the filter
may be rinsed under water (Diagrams a
and b). Allow filter to air dry completely
before use,
14
Advertisement
