Mounting The V-Belt; Tightening The V-Belt - Pfaff 3339 Instruction Manual

8

Mounting the V-belt

.01.04
Tilt the machine backwards.
Lay the V-belt onto the drive wheel of the machine and the V-belt pulley of the motor.
8

Tightening the V-belt

.01.05
Fig. 8 - 04
Hold the machine firmly, raise the anti tilt device 2 (Fig 8.02) and return the
machine to its upright position with both hands.
Danger of crushing between machine and table top!
2
1
Mounting and initial operation
Loosen nuts 1.
Using the motor-driven rocker 2, tighten
the V-belt.
Tighten nuts 1.
8 - 3