Positioning The Machine Head And Mounting The Anti Tilt Device; Connecting The Pneumatic Lines And Cables - Pfaff 3339 Instruction Manual

Mounting and initial operation
8

Positioning the machine head and mounting the anti tilt device

.01.02
8

Connecting the pneumatic lines and cables

.01.03
8 - 2
3
1
2
Fig. 8 - 02
5
4
Fig. 8 - 03
Insert and attach the machine head into
the table top with its hinged hook.
Tilt the machine head backwards a little
and have a second person hold it in this
position.
Insert lever 1 into the hole in the casing
and into the connecting link of the anti tilt
device 2.
Secure lever 1 with screw 3.
Return the machine to its upright position
7
Connect the pneumatic hoses from the
valve plate on the stand, with the
cylinder on the back of the machine
(taking care to observe the numbers on
6
the hoses).
Screw cable 4 (coming from the table
top) to the housing with two hose
clamps.
Connect plugs 5 and 6 to switch 7 (plugs
can be connected in either position).
Hold the machine firmly, lift the
anti tilt device 2 and return the
machine to its upright position
with both hands.
Danger of crushing between
machine and table top !
The plug to the main power
supply must be unplugged!