Technical Specifications; Installation Water Drainage - Electrolux Compact Service Manual

1. On/Off-button
2. Temperature selector
3. Extra drying effect
1.

Technical specifications

Power supply:
Heater element:
Power rating:
Fuse required:
Height:
Width:
Depth:
Water pressures:
Capacity:
2.

Installation water drainage

Place the discharge hose over the sink as illustrated.
It may not at any point be higher then 75 cm over the surface
which the dishwasher is standing on. If runs higher, operation of
the dishwasher might be impaired.
It is also important to ensure that the inside diameter of the hose is
not less than 13 mm at any point. If the discharge hose is too long
it can easily be cut to the right length.
Cut the hose to a suitable length, using a sharp knife.
Fit the elbow supplied onto the end of the hose.
Spares Operation - R.Kurzke 02/03
230 V - 50 Hz
1200 W
1280 W
13 A
460 mm
450 mm
480 mm
min. 50 KPa (0,5 bar)
max. 1000 kPa (10 bar)
5 settings
4. Programme selector
5. Indicator lamp
6. Salt indicator lamp
- 3 -
599 516 219 EN