Table of Contents
Advertisement
Remove the
base plate
The base plate of the machine
is held with screws on the
lower panel and at the bottom.
Lay the machine on its back
and lift off the base plate.
It contains the bosses for the
overflow water and the
flooding switch.
After removal you come to the
most important functional
components.
Spares Operation - R.Kurzke 02/03
Replacement
of the panel
Remove the screws from the
panel frame.
Remove the turning knob.
Carefully unclip the front .
Before finally opening, unclip
the lamps.
- 28 -
599 516 219 EN
Hide quick links:
Advertisement
Table of Contents
