Page 1
Under Counter dishwasher User manual * 59566UW00- 2021.02 *Original instructions...
Page 2
Foreword The installation, use and maintenance manual (hereinafter Manual) provides the user with information necessary for correct and safe use of the machine (or “appliance“). The following must not be considered a long and exacting list of warnings, but rather a set of instructions suitable for improving machine performance in every respect and, above all, preventing injury to persons and animals and damage to property due to im- proper operating procedures.
Contents A SAFETY INFORMATION ......................... 4 General information ........................4 General safety ..........................4 Personal protection equipment ......................5 Water connection.......................... 5 Electrical connection ........................5 Machine cleaning and maintenance....................6 Machine disposal.......................... 6 B WARRANTY ............................6 Warranty terms and exclusions ......................6 C GENERAL SAFETY RULES........................
SAFETY INFORMATION General information To ensure safe use of the machine and a proper understanding of the manual it is necessary to be familiar with the terms and typographical conventions used in the documentation. The following symbols are used in the manual to indicate and identify the various types of hazards: WARNING Danger for the health and safety of operators.
Personal protection equipment Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the machine's service life. Stage Protective Safety Gloves Glasses Safety garments footwear helmet ● ○ ○ — — Transport ● ● ○...
Warranty will be applicable where the customer has used only warranty is provided in line with local regulations and subject to genuine spare parts and has performed maintenance in the product being installed and used for the purposes as accordance with Electrolux Professional user...
– customer’s negligence, misuse, abuse and/or non-com- Check on Electrolux Professional website the list of authorized pliance with the use and care instructions detailed within customer care.
Instructions for use and maintenance • clean and dry; • well lit. Risks mainly of a mechanical, thermal and electrical nature exist in the machine. Where possible the risks have been For the Customer's complete information, the residual risks neutralised: remaining on the machine are indicated below: such situations are deemed improper and therefore strictly forbidden.
Operator machine installation, adjustment, use, maintenance, cleaning, repair and trans- port personnel. Electrolux Professional spa - Viale Treviso, 15 - 33170 Pordenone (Italy) Manufacturer Electrolux Professional SpA or any other The dataplate gives the product identification and technical data; service centre authorised by Electrolux listed below is the meaning of the various information given on it.
IPX5 Recipients of the manual Electrolux Professional spa - Viale Treviso, 15 - 33170 Pordenone (Italy) This manual is intended for: • the employer of machine users and the workplace manager • operators for normal machine use •...
NORMAL USE Correct use The Customer must make sure his personnel have understood the instructions received and in particular those regarding work Our machines are designed and optimized in order to obtain hygiene and safety in use of the machine. high performance and efficiency.
Adjustable feet Salt container (depending on the model) CONTROL PANEL DESCRIPTION Control panel description On/Off Some functions are common to all models of the range, Drain/self-cleaning cycle whereas others are available only on some versions. Display On/Off Tank temperature indicator This button indicates equipment status: on or off.
Drain / self-cleaning cycle Active/Wash Safe Control indicator In the Active/Wash Safe Control This button starts a drain/self-cleaning cycle. When the cycle is models a special device checks selected, the button indicator is lit up. the temperature of the rinse phase. GUARANTEED RINSE SYSTEM [GRS] is an automatic...
IMPORTANT • Half size basket - universal (500 x 250 mm) The appliance does not remove burnt food deposits from dishes. Dishes with burnt-on food deposits should be cleaned mechanically/chemically before putting them in the dishwasher. Before inserting the racks in the machine, clear the dishes of any food residuals and rinse them with cold or warm water, at a max.
The cycle times and the temperature may be personalised (e.g. detergent, rinse aid and descaling agent sug- increase of the rinse time and temperature). The cycle times gested by Electrolux Professional. In the Electrolux should only be set by a specialised personnel. Professional web site, open the “Accessories and Consumables“...
Page 18
CAUTION Water hardness in °fH, °dH, °cH / Regeneration frequency Only salt may be placed in the salt in nr of cycles container. Do not introduce any other °fH °dH °cH chemical substances such as detergent, 9 – 15 5.6 – 8.4 9 –...
DAILY CLEANING WARNING • Remove the overflow “A“ . Refer to “Safety Information“. Machine cleaning Cleaning must be carried out after every day of use. Use hot water, a neutral detergent/cleaner if necessary, and a soft brush or sponge. If another type of detergent is used, carefully follow the producer's instructions and observe the safety rules given in the information sheets provided with the product or substance.
CAUTION • Remove the filter “Z“ and clean away any remained food in The rinse arms “I“ and “O“ are not order to avoid blocking the draining system. symmetrical; the rinse arm with raised ring (“O“) should be fitted onto hub socket.
• leave the door ajar so that air can circulate inside, • A buzzer indicates completion of drainage. preventing the formation of unpleasant odours. • periodically air the premises. Machine disposal At the end of the product’s life cycle, make sure the equipment NOTE! is not dispersed in the environment.
Page 22
Anomaly Type of Possible causes Actions anomaly Condensation on glasses. Loss The container of rinse aid is empty. Check that there is rinse-aid in the performance. container and if necessary top up. Rinse aid pump does not work. Call detergent and rinse aid service centre.
Alarms Anomaly Type of anomaly Possible causes Actions NO WATER The tap is close. Open the tap. The water inlet filter is clogged. Clean the water inlet filter. Too low pressure in hydraulic circuit. Check the minimum mains pressure. Overflow not inserted (only for applian- Insert properly the overflow.
Need help?
Do you have a question about the EL1 Series and is the answer not in the manual?
Questions and answers