Lennox icomfort Quick Start Manual page 11

FEATURES
INSTALLER SETTINGS
DIAGNOSTICS
Allows installer to run diagnostic tests on any icomfort
enabled product.
select device to run
diagnostics on
HP
XP19−060−230−
06
5809K00015
AIR HANDLER
CBX32MV−60
5809K00020
Use the up/down arrow buttons to highlight and
press select and start to run diagnostics on selected
equipment.
Screen will display "DIAGNOSTICS IN PROGRESS . ."
and will show a list of values and conditions.
select type of device to run
diagnostics on
HP
XP19−060−230−
06
5809K00015
AIR HANDLER
CBX32MV−60
5809K00020
HP
Diagnostics
Line Voltage 220 volts
24VAC Voltage 24 volts
Y1 − Output On
PSC Fan Relay Closed
ECM Fan 1 On
ECM Fan 2 On
Y2 Solenoid On
Use the up/down arrow buttons to scroll through the
availbale information.
EQUIPMENT
The equipment tab allows the same equipment setting
adjustments as in the setup tab, see System Devices,
page 4.
run diagnostics on:
select
diagnostics
run diagnostics on:
HP
remove start
diagnostics
done