Samsung SVR-1660 User Manual page 66

User Manual
Remote Controller ID
Max. 16 remote controllers ID are selectable, and it can control max. 16 DVR
It can register Remote controller as following order.
Direct Remote controller to DVR.
-
Press ID button that suits to Remote Control ID set.
-
If Remote controller ID is identical to DVR ID, DVR buzzers.
-
After tune ID, Remote controller is available to use.
-
DVR ID
This menu is to set relevant keyboard address when it operates all functions of DVR through
keyboard button. First set value is set to "1". If it connects several DVR to 1 keyboard and use, it
can collide with other channel. At this time, it sets keyboard address to other value.
DVR Alias
This menu is to set DVR name.
Playback Deinterlace
It is On/Off Playback Deinterlace.
It works when Recording resolution sets to Full D1. When it sets to On, screen shaking is less in
Pause of Full D1 image.
Language
It supports multilingual for OSD menu. Select the language wants.
Firmware Update
Save update firmware in USB and connect it to DVR
Select firmware update item in the system menu and press ENTER
When there is question to update or not, peas Y and ENTER. The device reboot with buzzer
sound.
The firmware for USB update is formed in "*.dat" file.
Firmware update via network is perform update file and select the DVR to update and click on it.
When there is IP and MAC address, port for the selected DVR, type the password
"(default:11111111) at Admin's Password" SNM-128S and press "Starting upgrade"
Rebooting message pops up after upgrade and press "Y"
66