Russell Hobbs RHSB150 Instructions For Intallation page 17

 Put the plastic bowl onto the turn axis, onto the power outlet and turn the handle in a
clockwise direction.
 Put the blade support on the axis in the middle of the bowl and press it to the bottom.
 Now fit the chopping blade to the blade support. Warning: The blades are sharp.
Please only hold the plastic part while using.
 Put the ingredients into the bowl.
 Put the cover on the bowl and turn it until you hear the lid fitting correctly into place.
Slicing & Shredding
 Put the slicing or shredding disc into the disc support in the middle of the bowl.
 Put the turn axis onto the drive outlet tightly.
 Put the bowl onto the turn axis and on to the driver outlet. Turn the bowl in a
clockwise direction, until you hear it lock into place.
 Put the disc support on to the turn axis in the middle of the bowl.
 Put the cover on the bowl and turn it until it locks into place.
FILLING THE BOWL
Caution: Do not use the bowl without fitting the lid.
 Place the ingredients into the bowl.
 Do not fill past the MAX mark as the contents may force their way past the lid when
you start the motor. Larger ingredients need to be cut into smaller pieces, the size for
example at approximately 2cm × 2cm × 2cm.
 Fit the lid on the bowl as instructed above.