Table of Contents
Advertisement
Diagnostic Utility
Panasonic
Press F2 for Setup
Total run time for all diagnostics can take up to 22 minutes
•
Typical run time is closer to 15-20 minutes with no errors
•
Troubleshooting
Start / Restart the device
•
At the Panasonic welcome screen, press the
•
following key combination: [CTRL]+[F7]
If the there is a BIOS password, you can use
•
the [CTRL]+[F10] key combination to bypass
the BIOS password. This key combination will
only work with the diagnostic utility and will not
bypass the BIOS during the boot process
The system will enable the Diagnostic Utility
•
and all tests will initiate in the following order:
AC Adapter must be attached to the system
•
18
Advertisement
Table of Contents
