Table of Contents
Advertisement
1.
Click Security, IP Filter.
2.
Enter the IP addresses or range of addresses that are allowed management access to an interface, and click Add Web IP
Filtering Entry to update the filter list.
The page includes the following fields:
Object
Web IP Filter
Start IP Address
End IP Address
Add/Remove Filtering
Entry
4.11.14.2 SNMP IP Filter
You can create IP address groups that are allowed management access to the Managed Switch through the SNMP application.
1.
Click Security, IP Filter.
2.
Enter the IP addresses or range of addresses that are allowed management access to an interface, and click Add SNMP
IP Filtering Entry to update the filter list.
The page includes the following fields:
Description
Configures IP address(es) for the web group.
A single IP address, or the starting address of a range.
The end address of a range.
Adds/removes an IP address from the list.
Figure 4-11-43 SNMP IP Filter page screenshot
317
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Advertisement
Table of Contents
