4.4.2 Port Configuration
You can use the Port Configuration page to enable/disable an interface, set auto-negotiation and the interface capabilities to
advertise, or manually fix the speed, duplex mode, and flow control.
The page includes the following fields:
Object
• Name
• Admin
• Speed/Duplex
Figure 4-4-2 Port Configuration page screenshot
Description
Allows you to label an interface.
(Range: 1-64 characters)
Allows you to manually disable an interface.
You can disable an interface due to abnormal behavior (e.g., excessive
collisions), and then re-enable it after the problem has been resolved. You may
also disable an interface for security reasons.
Allows you to manually set the port speed and duplex mode. (i.e., with
115
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P