Yale EIS1100 User Manual page 9

Setting up the door viewer
1. All data will need to be set when the battery is
first fitted or when it is removed and re-fitted.
Press the left arrow button and hold down, then
press the power button and hold down both for
5 seconds, the MENU SETUP will appear.
Use the arrow buttons to scroll through the
subjects/settings, they will appear white as you
scroll, to select the subject press the power
button. When the selected items are white the
information can be changed using the left (up)
and right (down) buttons, use the power button
to move onto the next subject/setting.
Note: Sleep time refers to the length of time the
door viewer stays on once the power button is
pressed.
Set all of the subjects as required.
Note: If you do not 'exit' the menu the display
will stay on until either the battery is drained or
the door bell is pressed.
8