Before Installation; Battery Charger - Yale EIS1100 User Manual

Before Installation

Adapter
Charging
(Red)
Complete
(Green)
1. Charging the battery: The battery will

Battery Charger

need to be fully charged before inserting
into the LCD viewer, this will take 1
hours.
Plug the power adapter into the mains
power socket and insert the 'pin' plug into
the battery charger. Fit the battery into the
charger with label facing up.
The light will glow red when charging and
green when fully charged.
Note: the red light will blink if the battery is
not correctly inserted.
Battery Life: The battery will last about
400 to 500 snaps (photos) per charge
and can be recharged at least 200 times.
The battery have 6 months maximum
standby time.
2. Carefully insert the connecting cable
⁄ - 2
1
2 squarely into the back of the camera, blue
side up and in as far as the black line.
Important: The connecting cable is
fragile and should be handled with
care. Image will be distorted if cable not
connected properly.
3. Carefully insert the connecting cable
squarely into the back of the LCD viewer,
blue side up and in as far as the black
line.
3