Yale EIS1100 User Manual page 7

Installation instructions
5. Stick the twin adhesive tape to the
back of the L bracket. Remove the
adhesive backing. From inside stick the
L bracket in position over the drilled hole,
ensure it is straight.
From outside, insert the camera into the
hole (with 'PRESS' button at the bottom)
and carefully feed the connecting cable
and screws through the slot and the
holes in the L bracket. Hold the camera in
position.
6. From inside, place the connecting plate
over the screw heads and tighten the
screws onto the connecting plate. Tighten
so the camera does not move but do not
overtighten.
(continued)
7. Carefully insert the connecting cable
squarely into the back of the LCD viewer,
blue side up and in as far as the black
line.
6
• ✔