Glossary - Velux KMX 100 Directions For Use Manual

Glossary

Activation control: An operator device, for instance a remote control or
a control switch, with which you can operate products by pressing one or
several buttons/keys.
Configuration: See Preparation for registration below.
Memory: The following functions occupy the memory of the remote control:
Room, Group, Rename and Programs. Use of these functions will reduce the
total memory.
One-way activation control: Product based on one-way RF (radio frquency)
communication and marked with the symbol
under the battery cover.
Preparation for registration: An io-homecontrol
tered in an activation control before it can be operated. When a new product
is connected to mains or battery supply, it will search for an activation
control for 10 minutes.
Product: An io-homecontrol product, which can be operated with the
®
remote control, such as an INTEGRA roof window, a roller shutter, frame
lights etc.
Registration: A product is registered in an activation control when the
security key of the activation control is assigned to the product.
Repeater: A unit increasing the range of the remote control.
Two-way activation control: Product based on two-way RF (radio fre-
quency) communication and marked with the symbol
found under the battery cover.
96 VELUX
. This symbol can be found
1
® product must be regis-
. This symbol can be
2
Declaration of Conformity
In accordance with the Council Directive 2006/95/EEC
We herewith declare that VELUX
• roof windows GGL INTEGRA (----21) and GGU INTEGRA
®
• roof windows GGL Solar (----30) and GGU Solar (----30),
• flat roof window CVP (3MX A02),
• electrical conversion kit KMX 100 (3MG A01, 3UC A02, 3LA A01 and
3LR A01) for roof windows GGL and GGU,
• electrical conversion kit KMX 200 (3MX A01, 3LA A01 and 3LR A01) for
roof windows GHL, GHU, GPL, GPU, GTL, GTU and VKU,
• solar window operator KSX 100 (3SM B01, 3SD B01 and 3LR A01) for roof
windows GGL and GGU and
• remote control KLR 100 (3LR A01)
- are in conformity with the provisions of Machinery Directive 2006/42/EEC,
EMC Directive 2004/108/EEC, Low Voltage Directive 2006/95/EEC and
R&TTE Directive 1999/5/EEC,
- have been manufactured in accordance with the harmonised standards
EN 300220-2, EN 301489-3, EN 55014-1(2006-12), EN 55014-2(1997-02),
EN 55022(2006-09), EN 55024(1998-09), EN 61000-3-2(2006-04),
EN 61000-3-3(1995-01), EN 50366, EN 60335-1, EN 60335-2-103,
EN 61558-1 and EN 61558-2-17.
The above-mentioned VELUX roof windows, VELUX flat roof window, VELUX
electrical conversion kits and VELUX solar window operator - when the kit
or the solar window operator is installed on a VELUX roof window - are to be
considered as machines, which are not to be put into service until they have
been installed according to instructions and requirements.
The total system then complies with the essential requirements of the Council
Directives 2006/42/EEC, 2004/108/EEC, 2006/95/EEC and 1999/5/EEC.
VELUX A/S: ...............................................................................................................
(Lars Gylstorff, Product Management)
Ådalsvej 99, DK-2970 Hørsholm .........................................................................
(----21),
®
07-01-2010
Declaration No. 932886-04
VELUX 97