Technical Data - DeWalt D28142 Operator's Manual

ANGLE GRINDERS
D28142, D28143
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Voltage V
U.K. & Ireland only V
Type
Power input W
No-load/rated speed min -1
Wheel diameter mm
Spindle diameter
Weight kg
* weight includes side handle and guard
L (sound pressure) dB(A)
PA
K (sound pressure
PA
uncertainty) dB(A)
L (sound power) dB(A)
WA
K (sound power
WA
uncertainty) dB(A)
Vibration total values (triax vector sum) determined according
to EN 60745:
Vibration emission value a surface grinding
h
a = m/s²
h,AG
Uncertainty K = m/s²
Vibration emission value a disc sanding
h
a = m/s²
h,DS
Uncertainty K = m/s²
L (sound pressure)
PA
K (sound pressure
PA
uncertainty)
L (sound power)
WA
K (sound power
D28142 D28143
WA
uncertainty)
230 220–240
115 115
Vibration total values (triax vector sum) determined according
2 2
to EN 60745:
1100 1100
Vibration emission value a
10,000 10,000
a
h,AG
115/125 115
Uncertainty K =
M14 M14
Vibration emission value a
2.6* 2.6*
a
h,DS
Uncertainty K =
The vibration emission level given in this information
D28142 D28143
sheet has been measured in accordance with a
GB/QS GB/QS
standardised test given in EN 60745 and may be
91.5 91.5 used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
3 3
102.5 102.5
3 3
2.39 2.39
1.5 1.5
9.28 9.28
1.5 1.5
D28142
LX/B5
dB(A) 89.5
dB(A) 3
dB(A) 100.5
dB(A) 3
surface grinding
h
= m/s² < 2.5
m/s² 1.5
disc sanding
h
= m/s² 7.6
m/s² 1.5
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
EN GL IS H
D28143
LX/B5
89.5
3
100.5
3
< 2.5
1.5
7.6
1.5
3