Heat & Glo SOHO-N-CEB Owner's Manual And Installation Manual page 68

B. Vent Components Diagrams (continued)
Note: Heat shields MUST overlap by a minimum of 3,8 cm. The heat shield is designed to be used on a
wall 10,2 cm to 18,4 cm thick. If wall thickness is less than 10,2 cm the existing heat shields must be
field trimmed.
38,4 cm
30,5 cm
20,6 cm
38,1 cm
Figure 16.4 SLP Series Vent Components
68
20,3 cm
SLP-TRAP
Horizontal Termination Cap
33,0 cm
HORIZONTAL TERMINATION CAP
39,4 cm
SLP90 SL-2DVP
Heat & Glo • SOHO-B-CEB, SOHO-N-CEB, SOHO-P-CEB • 2111-980 Rev. F • 8/11
Heat
Shield
Term Cap
Max
SLP-TRAP2
Effective
Length
Effective Length
14,6 to 21,3 cm
14,0 cm
87°
SLP-HRC-SS
SLP-HRC-ZC-SS
17,8 cm
DVP-FBHT
Minimum Maximum
Effective Length Effective Length
13,7 cm 23,8 cm
21,3 cm
3°
26,7 cm
27,6 cm
30,5 cm
DVP-FBHT